If you have a fluid level to check on your talons that might be your problem lol
Type: Posts; User: jb7725
If you have a fluid level to check on your talons that might be your problem lol
Mercury 150efi OG407092
had some work done on my boat over the winter and had the motor removed so I tried to bleed the oil lines today by running on a remote gas tank with premix while I had the...
Thanks for the advice clearly you have a reading comprehension deficiency, I would do it myself but I don’t have the time
to do it right now and I want to get it done asap as stated in my original...
Will these units be able to share waypoints with the regular 93sv units, not the ”plus”. I want to put a 12 at my console but I have 93sv on the bow
Anyone recommend someone to re carpet my boat. I live about an hour north of NYC not too far from Danbury CT. I could do it myself but I don’t have any spare time to do it at this moment.
Positive wire from trolling motor plug outlet on bow to 60amp breaker then to battery. You can charge the batteries hooked up no problem but a good idea to either unplug the trolling motor at the bow...
12.2 replica done by marine creations. Mikes attention to detail makes him the best in the business in my opinion.
https://i.ibb.co/k9bt0x4/B82-FC721-8-A48-465-E-933-C-59263-F762731.jpg...
Hey man, I live in Wappingers Falls too, I can give you a hand installing the motor or talons if you get them
Iv tried searching but I cannot find the post, didn’t someone post in here about a remedy to fix stripped out screw holes for the switch panels?
My ecu was replaced with a brand new mercury ecu, I’m not sure about Batman’s
Don, do you offer this kit for sale?
I’m thinking of re powering my boat in the near future with a new 175pro xs 4 stroke, anybody run one of these and if so how do you like it
I have the same motor in a 150, same problem. Literally did everything you do to try and fix it, (drove 27 hours round trip to Dons shop) I even replaced the ECU with a brand new one, same issue. If...
I just replaced the warning module now when I key up it beeps more that I remember is this correct?
Serial number: og407092
https://vimeo.com/274172615
Thanks, I actually saw that befor I posted this, was hoping it was something else befor I dropped $300 on the module but I ordered the module anyway haha, I’ll report back when I get the module in....
I have a 1996 Mercury 150 efi. Serial number og407092. My warning horn sounds constant as soon as key is turned on. I replaced the warning horn itself, problem still exists. I tried disconnecting the...
On my 1996 186 the livewell timer was under the console, it looked like a small computer board. I believe it had black brown and orange wires going to it. I replaced it when it went bad with a new...
Yes I have searched the boards but I can't come up with a solid answer. Can anyone tell me the exact size for the trimlok for the compartment seals, there's a million different kinds/sizes. Thanks...
What you asking for the 202?
looking for a step up cooler for a 96' 186. C&O no longer has any. So if someone has one kicking around drop me a PM. Or if anyone knows someone who builds them out of aluminum that would be good too
thanks guys i will try that
I have a brand new fortrex 45" 80#. First time using it everything was fine. Today was my second trip out and when I try and stow the motor it doesn't lock into place. I literally have to manually...
Does any one have any pics of how they installed dual electronics on the console. I currently have a Harmon 93sv mounted on a ram mount that the base is bolted to the top cap. I want to add a second...
I have 2, echomap 93sv chirps, and I'm interested in installing the new headisng sensor. As far as I can tell I need a nmea 2000 starter kit, and the sensor unit. When all hooked up will this give me...
looking to upgrade to a fortrex, anyone running a 52" trolling motor on their 186? just don't want it to stick out the side when stowed. My 45 maxxum comes out of the water a lot even when its not...