Search:

684cb is an outstanding popper rod

Believe he posted that info in the Phoenix forum under a discussion about the new (not sea dek) floor material Phoenix was using.

The Merc monitor is much more accurate than the stock gauge. When I fill up at the same pump mine is usually less the 1/2 gallon off. I don't use the gauge at all I just set my Merc Monitor to fuel...

Dealer is 2:30 hours. I'm never against learning how to fix something, especially if its easy and could come in handy down the road. I wiped the fluid off the tongue and am going to see where...

Apparently because my 2017 was the same size.

Big Jim posted a video on the new material Phoenix uses and the company that makes it recommended 303 protectant as a treatment to keep it clean.

You couldn't pay me to go back to carpet in the...

If you clean and then spray with 303 - that makes it much easier to keep clean.

Mercury Part #8M0183487

Agree - first thing I did with my new boat was switch the spare nut out to one the same size as the other wheels.

I’ve got a new Marine Master trailer that is leaking brake fluid under the tongue - looks to be a couple bottle caps of fluid so far. Will call Marine Master today but guessing the answer is a...

After reinstalling the SSR hub (tightening prop nut in 1/4 intervals based on # of blades) and then trying a second SSR hub I bought as a backup, I still had this vibration @ 1700-2000 RPM. I agree...

I do

Yes - dual 34s now and soon to be 34 and 62. Running it side by side with M360 and after 40 hours and 1 tourney I find myself rarely looking at 360 anymore. Only reason I havent taken it off is...

Agree 100%

Smart move on the 140 and 10ga to each unit will be fine.

Just to follow up on this, I removed all 8 PVS plus from the Fury prop and it completely eliminated the hole shot issue. Boat jumps up on pad now. I bought a 23P just to get engine RPMs above 5750...

Perspective is very impressive - surprised how close it is to 360 as far as image quality. However one thing I’m still playing with it crosstalk with two LVS 34s so in that regard if running both...

24 or 25 Fury 4 blade was what mine liked best - would get low 70s stock and 74-75 flashed.

I was just thinking this weekend how precise the Ultrex Quest pedal movements are - perfect for FFS.

Ceramic is the way to go with a ceramic detailing spray - cuts my cleaning time to 1/3 of what it was.

:thumb up2:

Thanks Don - I actually bought the new SSR hub from you. I read the instructions - including torquing and correct orientation on the washers etc. I just pulled the hub and reinstalled it though in...

I’m going to pick up a Fury 4 23P to try - I just put a 24P Fury 3 with open vents on to see how that runs and if the vibration is gone.

Thanks guys - Im hoping drilling a few holes in the plugs will help - the prop has a lot of plugs - 8 so maybe try 1/8” in 4? I’ve got no idea how much of a change this will make. The weight...

I’m running a 21’ Phoenix. My last Phoenix had the same hull with an SHO, now the Merc. Just broke in the Merc over the course of a couple days. Two questions:

1) I noticed with a full gas tank...