Search:

If the mode button is depressed for 5 seconds it will start charging a battery that is too low for it to recognize the battery....on that charger. Then choose the mode you want. I unplugged mine and...

Split bolt connectors and a cord grip.

I just added 2 new 100ah lithium batteries to my boat. The current charger has a lithium setting at 5a per bank. Charging voltage reads 13.5v on the lithiums but it was 14.2v hooked up to the wet...

There is a new chart but the old one said 4 awg. I had a 55 once and used the 4 awg. I'm not sure why mk changed the chart....voltage drop math hasn't changed.

I'm wanting to rest my 190 hull on a couple of jack stands and a 2x6 to change out the bunks. One side at a time. What's the likelihood of damaging the hull? Where is the best placement for a 2x6,...

I'm wanting to rest my 190 hull on a couple of jack stands and a 2x6 to change out the bunks. What's the likelihood of damaging the hull? Where is the best placement for a 2x6, 6ft long. It would be...

Which boat do you have? Several different tournament models are out there.

I like about 7 ft. On spinning gear. If I use that set up much I'll retie the whole thing before next trip. I don't use leaders on baitcasters.

That's it. For the finesse trd I use the owner offset block head in 1/8. Some times that's the ticket.

That's over my head. 150 charges year for 5 years is 750 cycles... I'll be able to live with that, if I'm so lucky

Thanks

The Davis Horsehead looking one gets hung up in rocks the least...by a bunch. That's pretty much my go to with a big trd in 3/16.

I just reel in and snap. I'd say it depends on if you're fluro, mono, braid to leader, drag, the rod power and the hook. It is possible to pull too hard, make a big rip with the thin hooks and they...

I cut the fuses off and put a 7.5 in the panel? Why.....I've seen wires melted together in a wad. Not pretty.

Like Winchester says...it ain't lakemaster. Mine is off in different parts of the lake and I'm finding the shading off even if the depth is correct. My lake drops a good bit in winter so I need...

Tracker wiring is barely adequate for the junk they stick on the boat. IMO

I'd have hardwired it. If it's a 60 Amp circuit I'd have thought it required a 60 Amp rated plug?

Your meter will show charger coming on and off. I've been told that 10% of ah rating is enough charger so for 50ah batteries you should be good. Interested in what you find out.

Couldn't get wire to console from battery compartment. Haven't done it yet but I'm thinking the cup holder next to the cooler can be removed, fish wire from back, under charger and up to center rod...

If there's less voltage drop it's because the conductors are larger, more copper. Not because it says sea clear. You can get American made marine wire off amazon....buy the good stuff. IMO, you need...

You have luck with the in warranty changes? Running wire to negative posts of each battery plus the jumper didn’t help me. All my interference was eminating from the motor casing itself so yours may...

Well, I use 15 lb power pro to fluro with the shin knot. 14/15 wraps 10 lb or lighter leader. If mine pulls loose it's at the lure, double pitzen knot. 10 lb braid is a little hinkier. The braid...

Forgive my ignorance in not being able to post the pic but mk chart for wire size plainly states that 8 awg is good for 25 ft at 112. Just sayin

Since nobody has said it....check the fuse in the head plus try it without battery charger wires connected. If that fuse is good it should show continuity from neg side of plug to tm prop...

I'm confused. Should be a 3 Amp fuse in the panel?