I got one of the first dash replacements from Ashmore. I've had a single 12" mounted since installation. You have to look around graph to see tachometer. Seeing gas gauge and trim are easy. I'm...
Type: Posts; User: Warrenroadie
I got one of the first dash replacements from Ashmore. I've had a single 12" mounted since installation. You have to look around graph to see tachometer. Seeing gas gauge and trim are easy. I'm...
Only 16 hours on motor. Have been at 75 several times during runs in a tournament. I'm not the type that goes out and just does WOT. The fastest I normally drive my boat is just separating myself...
I agree with bassfisher444-I'm running a 24 Tempest on mine. Hole shot, mid-range and WOT is awesome.
Note: my hull is shorter and older than yours. I'm running a 250 4S as well. Do you have an issue with getting the bow up while running? I have an Ultrex and 2 12inch units up front and never go much...
I have a 20X not sure if bilge area is smaller or not. Before converting to lithiums I had 4 agm 31"s, charger and power pole pumps all in the same area. I also have the 2005 tube trailer with no...
We have been using the Germguardian Air purifier continuously for about 4 years at the lake cabin. We change the filter approximately every 6 months or so. It had good ratings on amazon website when...
I built one at the back on the outside of my shop. Two 4 x 4 legs secured in concrete with 2 x 4's holding 3/4" piece of plywood covered with sheet of hdpe. Garden hose on one side and knife holder...
Awesome. Congratulations!
Be disappointed, but just laugh about it. There a lot of people going through a lot of worse things each and every day. I share a property line with two neighbors approximately 600 ft. each side. One...
When I started reading thread I did not consider this at first. For all you folks that served and went days without bathing, I thank you for your service and sacrifice. I very much appreciate the...
Are referring to the dual adjustable deck mount? Just want to verify. Thanks!
cdevette,
Nice innovation with the support blocks epoxied under bow cover. You did a job on your mounting system. I want to stay with over the pedal mount system through bolted on the deck and...
gdrau and cdevette. Thanks for your responses. Going to look at both now.
Looks good. Have fun on your upcoming adventures during retirement.
Okay. Trying to choose between BBT bigfoot II dual stack mount that is regular stack or the offset right stack for my two Live 12". I would prefer the regular stack vs. the offset because of boarding...
I have two Lowrance 12" Lives to replace my single Lowrance 16" on the bow setup now. Current setup is Precision Sonar over the pedal mount with BBT HD gimbal bracket. Wanting the low-profile type...
I purchased a Bosch 50GLL at Home Depot. Used on lean to build to my boat garage. It was handy due to magnet that allowed level to stay on building so I could set correct pitch on rafters to post....
No regrets. Did in two different weekends at the lake house. Just so I could keep boat at the dock and spray trailer out under the pine trees. If you do in your shop tarp the floor for sure. The...
I did my Master Marine trailer for my Triton in 2022. I sanded, then primed trailer with UPOL etching primer then final coat with the UPOL Raptor urethane liner. I purchased the 6-quart kit from...
Just to clarify for anyone who is interested. UAN is combo of Urea, Ammonium Nitrate and water blended to provide the consumer 32% nitrogen content. Anhydrous ammonia also remains mostly a liquid in...
Like many others, hitting something submerged and/or floating and out of sight. During recreational boating season, boats drivers placing me at risk.
Nice job.
Forgot to state in OP. My MMT hubs are the Gold hubs, not the vault. Was just wondering when you have to update hub caps are folks using a different brand oil hub or converting to the vault special...
recteq
We have three different scratch and dent models. Local to us. No issues and high-tech smoker for sure.
I'm at 19 years on my tandem MMT and still servicing my hubs as needed, no current issues. Since it appears the caps are not available anymore for replacement has anyone found a suitable replacement...