What size O ring is for skirt collars?

[Mark Perry]

Not talking about skirt bands. Talking about actual O rings. I ordered some 6mm but they seem too small.


Thanks

[21XDC]

B50104 1/8"ID X 5/16"OD X 3/32"CS

AS568-104 B50 NBR

https://www.theoringstore.com/store/...roducts_id=765

[21XDC]

I've sent Bryanmc57 some. He has both B50 and B70. I'm sure he will give you some to play with. The B70 is less stretchy.

[Mark Perry]

Thank you. Much appreciated.

[MonteSS]

For skirt bands, the o-rings roll off the jig too easy. I used to use vacuum line from an auto parts store and slice as wide as I wanted.

[21XDC]

For skirt bands, the o-rings roll off the jig too easy. I used to use vacuum line from an auto parts store and slice as wide as I wanted.

These I mentioned are much smaller/ thicker cross section and don't roll off like you speak of... Unless you have tried these personally... I doubt it.