Which way do you rig them?
IMG_0256[217].jpg
Which way do you rig them?
IMG_0256[217].jpg
Tail down
Ball head jig with the tail on the same side as the hook.
Chris
2020 Nitro Z19 Pro w/ 200 ProXS
Tail up
Tail up also
2009 ELITE 210
Tail down always. Jig, spinnerbait etc.
2019 Nitro Z19 Sport with 150 Four stroke
Swinging bass in the front
and wake boards and tubes off the back
Tail up
Tail up and come out on the seam, same on a worm. If tail down on a worm, you have a dead worm.
To be clear, tail up I mean the hump is up on a worm and come out on the seam, as the bottom lure shows. I do the same on a grub
Last edited by rid 05 198; 05-09-2022 at 08:57 PM.
Originally Posted by jerrysfishing
tail down for keeping bait up in water and tail up for keeping lower.
Tail up
1995 Ranger 481v
1995 Johnson Fast Strike 175hp
Tail down....please don't tell me I have been doing it wrong for 60 years. I really hope not.
1989 Ranger 395 V I/O 20'
1998 Mercruiser 350 MPI Mag thru hull exhaust delete (factory install)
Outdrive: Bravo 3 running 30 pitch Merc factory prop set.
Ultrex, Lowrance and Tallons
Full deck conversion
You good. Hump up same as on a worm. Hump down on a worm it just goes into the ground, dead worm.
One of those is upside down.
GETFISHED !!!
Tail down
Tail up
2008 BULLET 21XD 2007 Merc 300xs
Tail down. They don’t work right otherwise.
Dave
2021 Triton 18TRX, Mercury 200 ProXS-4s
Lowrance Elite FS, w/ Active Target
Humminbird Helix 9 MEGA SI G4N
Humminbird Helix 9 MEGA DI G4N
Hook up, Tail down.
1st one of the ways, when it gets beat up the other way...
oe
You can use it both ways.
I've always been told tail goes the same direction as the hook. So up........but you can use it anyway - up or down.
Reply With Quote
