Got my poles installed need advice

[RSteed]

How much slack should I have in the hoses from my transom to the pole? Does that make sense? Does poke pull in hoses when fully deployed?

[RSteed]

Also my poles aren’t in sync going down. One is behind the other.

[mactlman]

Also my poles aren’t in sync going down. One is behind the other.

get the app can adjust the speed cmonster app

[KandKKustomz]

Also my poles aren’t in sync going down. One is behind the other.

you will need to fully bleed then do your deep water bleeding and use them before worrying about if there not in sync and traying to adjust in the app. as far as slack its not much we try leave least 12 inches

[mactlman]

you will need to fully bleed then do your deep water bleeding and use them before worrying about if there not in sync and traying to adjust in the app. as far as slack its not much we try leave least 12 inches

i have never been pleased with the way my poles work but have never deployed them in deep water either? maybe they need this to bleed out fully?

[KandKKustomz]

i have never been pleased with the way my poles work but have never deployed them in deep water either? maybe they need this to bleed out fully?

depends what your not pleased with if you have had them a long time im sure there is no air trapped in the system so bleeding prob will not help. Happy to try troubleshoot your problem feel free to pm or call

[toonedin]

i have never been pleased with the way my poles work but have never deployed them in deep water either? maybe they need this to bleed out fully?

I just installed 2 blades and same issue...one lagged behind the other ( only coming up)
Did a deep water bleed and all is good for me.