Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    May 2023
    Location
    Madison,MS
    Posts
    249

    I need quick advice. Stuck on lake.

    One power pole is down and has lost all the hydraulic fluid. How do you manually get it up. ?

  2. Member
    Join Date
    Dec 2022
    Location
    Dallas, TX
    Posts
    1
    #2
    in the event of HPU failure, your Power-Pole anchor may be manually stowed by activating the pole
    protector valve.
    - Do so by applying enough upward force to lift the unit into its upright position.
    - If the anchor is not within reach, you may drive the boat toward shallow water.
    This will apply enough upward force to lift the unit within reach.

  3. Member
    Join Date
    May 2023
    Location
    Madison,MS
    Posts
    249
    #3
    Thanks. I tried pulling forward but no luck. Someone is bringing me hydraulic fluid. Hopefully it will come up enough to get me in.

  4. Scraps
    Join Date
    Apr 2007
    Location
    Havertown, PA
    Posts
    9,732
    #4
    Wonder if you could swap the hydro lines?
    2017 Phoenix 819
    2016 200ProXS, s/n 2B359849, Mod 1200P73BD

  5. Member
    Join Date
    May 2023
    Location
    Madison,MS
    Posts
    249
    #5
    The hydraulic fluid worked. I had a loose nut connection that just needed tightening

  6. Scraps
    Join Date
    Apr 2007
    Location
    Havertown, PA
    Posts
    9,732
    #6
    Those fittings on the reservoir seem to weep all the time regardless of fitting tightness.
    2017 Phoenix 819
    2016 200ProXS, s/n 2B359849, Mod 1200P73BD