When I added an Ultra 106SV to my bow, I used the existing power cable that went with the UHD 93SV that was there previously. I just noticed these two units use different power cables.
UHD 93SV-------PART NUMBER010-12445-00
Ultra 106SV-- PART NUMBER010-12938-00
Will I notice a better image with the 106 if I install the correct power cable for it?
2020 Ranger VS1782 DC
Mercury ProXS 150
Garmin 106 Ultra/UHD 93sv/LVS34
Ulterra Quest, 115/90
probably not
but 93 cable is 18 ga and 3amp fuse
106 cable is 16ga and 8 amp
2000 Champion 190SX
2000 Yamaha VMAX 150
Garmin Force
106`s @ bow & console
93 SV UHD 2 @ bow
LVS 32 perspective
LVS 34 forward
Talon
/\ ThisOriginally Posted by majatk
I did the same thing. Replaced a 93sv with a 106sv and used the 93sv power cable for the 106sv (I did swap the fuses however). I later went back and replaced the power cable with the 16ga 106sv cable and used the proper 8 amp fuse. I would recommend using the 16ga cable if for nothing more than peace of mind.
Reply With Quote