TH Marine Zippered Rigging Sleeve

[VH5150]

Has anyone tried this? Looking for a easier solution then taking all the wires out.

Screenshot 2024-08-18 at 9.32.31 AM.png

[okskeetertzx190]

I have used that and vacuum cleaner hose that I split and then used a couple zip ties to hold it back together when I was done. I think the vacuum cleaner hose looked better but both worked.

[mikeky]

I have one. Get one and don't look back.

[VH5150]

I have used that and vacuum cleaner hose that I split and then used a couple zip ties to hold it back together when I was done. I think the vacuum cleaner hose looked better but both worked.

Thanks

[VH5150]

I have one. Get one and don't look back.

Thanks

[mactlman]

work great

[jimsch]

Have had on for several years without issue

[plki]

Over 5 years, hundreds of hours in the sun no issues

[VH5150]

Great reviews !

[VH5150]

Should i remove the ripped rubber hosing before I install the rigging sleeve? Or just install the sleeve over the hose?

[mactlman]

Should i remove the ripped rubber hosing before I install the rigging sleeve? Or just install the sleeve over the hose?

i put sleeve over all that was there kinda depends on sleeve you are covering? if nasty might be worth removing. On mine, the plastic sleeve was damaging the glass gel coat

[VH5150]

i put sleeve over all that was there kinda depends on sleeve you are covering? if nasty might be worth removing. On mine, the plastic sleeve was damaging the glass gel coat

Thank you

[ddjr]

I’ve had one for several years in the back. Also put one up front to keep the wires confined!

[VH5150]

I’ve had one for several years in the back. Also put one up front to keep the wires confined!

Great! I ordered it. Just the only question is should I remove the old casing before I install it?

[TableRock55]

Re-powered my 2017 Phoenix 618 w/175 Suzuki. It took 2, but works great.

[VH5150]

Re-powered my 2017 Phoenix 618 w/175 Suzuki. It took 2, but works great.

I finally bought nit and put it on. It was a challenge putting it on. LOL

[BroWhoop]

I used one of these on my brothers Ranger.
https://www.wirecare.com/?gad_source...MaAhcUEALw_wcB

[Blazerguy]

I bought one of the TH marine sleeves. I like it.

[tj]

I have a really old TH Marine sleeve. Keeps things protected from rubbing on the Champion transom support plate.

I use the fuel line/primer bulb to siphon fuel; for gas tank removal, all bilge pumps/transducer/LW valves are under the gas tank.