Thread: 296 running pic

Page 1 of 2 12 LastLast
Results 1 to 20 of 25
  1. #1
    Charger Boats Moderator TOUCH OF CLASS's Avatar
    Join Date
    Jul 2005
    Location
    St Louis Mo.
    Posts
    10,651

    296 running pic

    For you guys that have never seen a 296 heres a pic,this pic running around 71 ish at 5500,with no plate straight to the transom,with a 27 tempest on a 200 opti,I think a 25 would be a better prop,but keeping the rs below the 5750 on the opti is tough.
    And with a 200 proxs you should see 2 mph .
    Stick a 8 inch plate and you will be at 75 easy.
    Also this test is with 2 guys and a full tank of gas.


    Last edited by TOUCH OF CLASS; 07-30-2012 at 06:21 PM.

  2. Member Tommy13's Avatar
    Join Date
    Apr 2010
    Location
    Waynesville, MO
    Posts
    2,176
    #2

    Re: 296 running pic (TOUCH OF CLASS)

    Good Compliment to the 195.

    For a long time the 296 was the boat I wanted. Then I found my current 596.

  3. Charger Boats Moderator TOUCH OF CLASS's Avatar
    Join Date
    Jul 2005
    Location
    St Louis Mo.
    Posts
    10,651
    #3
    Ba k up

  4. Charger Boats Moderator TOUCH OF CLASS's Avatar
    Join Date
    Jul 2005
    Location
    St Louis Mo.
    Posts
    10,651
    #4

  5. Fishin in the corn bassin again's Avatar
    Join Date
    Jun 2011
    Location
    Iowa
    Posts
    520
    #5
    Actually TOC the 200 Pro XS has the same 5750 upper limit as the optimax



  6. Member
    Join Date
    Jan 2011
    Location
    Ofallon, MO
    Posts
    2,889
    #6
    Quote Originally Posted by bassin again View Post
    Actually TOC the 200 Pro XS has the same 5750 upper limit as the optimax
    I think we need a new Moderator! This guy doesn't know anything!!

  7. Charger Boats Moderator TOUCH OF CLASS's Avatar
    Join Date
    Jul 2005
    Location
    St Louis Mo.
    Posts
    10,651
    #7
    I wonder why they made the 225 -250 6000 and not the 200...must be a merc thingThats why Iam going SHO.

  8. Member Sooner496's Avatar
    Join Date
    Nov 2010
    Location
    Oklahoma City
    Posts
    2,095
    #8
    Now I know you've lost your mind!!!

  9. Member
    Join Date
    Jun 2012
    Location
    Edmond,OK
    Posts
    123
    #9
    I have this exact boat with a 25 Tempest on it and i cannot get anything over 65mph with 1 man and 1/2 tank of gas.... is there something you recommend or is the 27 the answer? The R's are at 5750 with this prop on.

  10. Member Tommy13's Avatar
    Join Date
    Apr 2010
    Location
    Waynesville, MO
    Posts
    2,176
    #10
    What is the prop to pad measurement and is your prop stock?

  11. Charger Boats Moderator TOUCH OF CLASS's Avatar
    Join Date
    Jul 2005
    Location
    St Louis Mo.
    Posts
    10,651
    #11
    Prop blueprinting is the key....a bad tempest will be anywhere from 3 to 6 mph slower than a perfect
    one.We have seen low 60s with a bad prop and mid 70s with a good prop on the same rig.

  12. Member
    Join Date
    Jun 2012
    Location
    Edmond,OK
    Posts
    123
    #12
    The prop is stock yes. I would have to get the dimensions from prop to pad. Everything is factory though. Wonder who in the OKC area will blueprint the prop.. and the cost? Also.. can a jack plate be put on this boat? Somewhere at one time.. somebody told me that charged didnt recommend putting a jackplate on this model of boat?

  13. Charger Boats Moderator TOUCH OF CLASS's Avatar
    Join Date
    Jul 2005
    Location
    St Louis Mo.
    Posts
    10,651
    #13
    Yes you can put a plate...8 inch is all the 296 needs and a good tempest..
    Send your prop to croxton hes on the prop board...fill the form out and tell him you need the
    Charger blueprint he will dial it in.

    http://www.bassboatcentral.com/marksprops1.htm

  14. Member Tommy13's Avatar
    Join Date
    Apr 2010
    Location
    Waynesville, MO
    Posts
    2,176
    #14
    Add a plate and have Croxton work your prop if you can. You'll not regret it.

  15. Member
    Join Date
    Jun 2004
    Location
    pittsburg
    Posts
    1,358
    #15
    I didn't know there is a difference in the Opti and Pro Xs?
    Just James

  16. Charger Boats Moderator TOUCH OF CLASS's Avatar
    Join Date
    Jul 2005
    Location
    St Louis Mo.
    Posts
    10,651
    #16
    The pro xs stickers are kinda like chrome air cleaner and chrome valve covers its fasterBut in the real world
    the pro xs is not a pro xs it does not have fiber reeds,higher fuel rail psi ,6000 rpms limiter .It would be a bad ass 200 if it was a pro xs.

  17. Member
    Join Date
    Nov 2013
    Location
    Cranston, Rhode Island
    Posts
    116
    #17
    perfect boat right there

  18. Member
    Join Date
    Jul 2012
    Location
    Texas
    Posts
    64
    #18
    71 with hats still on facing forward...they must be tight lol

  19. Member
    Join Date
    Jan 2011
    Location
    Ofallon, MO
    Posts
    2,889
    #19
    It has been a long time since I rode in a 296. How does it compare to the 195? I am sure it is better than my 186.

  20. Member Tommy13's Avatar
    Join Date
    Apr 2010
    Location
    Waynesville, MO
    Posts
    2,176
    #20
    The 296 is an awesome boat and exactly what I wanted for a long time. Just feels a bit skinny when compared to a 396. I'd still love to have one though.

Page 1 of 2 12 LastLast

Similar Threads

  1. How should I be running
    By bassinbubba in forum Champion Boats
    Replies: 9
    Last Post: 05-25-2011, 04:21 AM
  2. Engine appears to be running on 3 cyl's after running for 20 minutes
    By sconoy1183 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 10-08-2010, 08:06 PM
  3. Anybody running a.......
    By Backlash Ar in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 02-08-2009, 05:07 PM
  4. Anyone running a 295
    By sniperfish in forum Phoenix Boats
    Replies: 4
    Last Post: 08-26-2008, 03:23 PM
  5. Went from running good to not staying running
    By wildmaninal in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 03-14-2008, 07:14 PM